maximum ratings and thermal characteristics (t a = 25? unless otherwise noted) parameter symbol df005sa DF01SA df02sa df04sa df06sa df08sa df10sa unit maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward output rectified current at t a = 40? (2) i f(av) 1.0 a peak forward surge current single half sine-wave superimposed on rated load (jedec method) t j = 150? i fsm 30 a rating for fusing (t < 8.3ms) i 2 t 4.5 a 2 sec typical thermal resistance per leg (2) r ja 40 ?/w r jl 15 operating junction and storage temperature range t j , t stg 55 to +150 ? electrical characteristics (t a = 25? unless otherwise noted) maximum instantaneous forward voltage drop per leg at 1.0a v f 1.1 v maximum dc reverse current t a = 25? 5.0 a at rated dc blocking voltage per leg t a = 125? i r 500 typical junction capacitance per leg (1) c j 25 pf notes: (1) measured at 1.0 mhz and applied reverse voltage of 4.0 volts (2) units mounted on p.c.b. with 0.51 x 0.51?(13 x 13mm) copper pads new product mounting pad layout df005sa thru df10sa miniature glass passivated single-phase surface mount bridge rectifier reverse voltage 50 to 1000v forward current 1.0a features ?plastic package has underwriters laboratory flammability classification 94v-0 ?this series is ul listed under recognized component index, file number e54214 ?glass passivated chip junctions ?high surge overload rating of 30 amperes peak ?ideal for printed circuit boards ?high temperature soldering guaranteed: 260?/10 seconds at 5 lbs. (2.3kg) tension mechanical data case: molded plastic body over passivated junctions terminals: plated leads solderable per mil-std-750, method 2026 polarity: polarity symbols marked on body mounting position: any weight: 0.04oz., 1.0g packaging codes/options: 27/1.5k per 13?reel (16mm tape) 45/50 ea. per tube-bulk 0.255 (6.5) 0.245 (6.2) 0.013 (0.330) 0.009 (0.241) 0.060 (1.524) 0.040 (1.016) 0.404 (10.3) 0.013 (0.330) 0.003 (0.076) 0.047 (1.20) 0.040 (1.02) 0.205 (5.2) 0.195 (5.0) 0.335 (8.51) 0.320 (8.13) 0.130 (3.3) 0.120 (3.05) 45 o 0.386 (9.80) dimensions in inches and (millimeters) case style dfs 7/27/00 0.404 max. (10.26 max.) 0.205 (5.2) 0.195 (5.0) 0.047 min. (1.20 min.) 0.060 min. (1.52 min.)
ratings and characteristic curves (t a = 25 c unless otherwise noted) 20 40 60 80 100 120 140 160 0 0.5 1.0 1 10 100 0 5 10 15 20 25 30 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1 10 0 20 40 60 80 100 0.01 0.1 1 10 100 1 10 100 1 10 100 0.01 0.1 1 10 100 0.1 1 10 100 fig. 6 - typical transient thermal impedance fig. 5 - typical junction capacitance per leg transient thermal impedance ( c/w) junction capacitance (pf) t, heating time (sec.) reverse voltage (v) t j = 25 c f = 1.0 mhz vsig = 50mvp-p 1.0 cycle 60 hz resistive or inductive load p.c.b mounted on 0.51 x 0.51" (13 x 13mm) copper pads fig. 3 - typical forward characteristics per leg instantaneous forward current (a) instantaneous forward voltage (v) t j = 25 c pulse width = 300 s 1% duty cycle fig. 1 - derating curve output rectified current average forward output current (a) ambient temperature ( c) fig. 2 - maximum non-repetitive peak forward surge current per leg peak forward surge current (a) number of cycles at 60 hz t j = 150 c single sine-wave (jedec method) fig. 4 - typical reverse leakage characteristics per leg instantaneous reverse current (a) percent of rated peak reverse voltage (v) t j = 125 c t j = 50 c df005sa thru df10sa miniature glass passivated single-phase surface mount bridge rectifier
|
